Free Trial

CASE STUDIES

Cases

Sheet metal, CNC, gears, robotics, different industries, the same bottleneck.
Every day someone is reading drawings, copying dimensions and keying in orders. Here is what happened when our customers handed that part over.

Fu Juan Steel Precision sheet metalDayuan, Taoyuan

Fu Juan Steel Co., Ltd.

A dozen customer drawings to quote a day, with material estimates coming off a veteran's tape measure. Now CADASU works out the flat length and the operations first, and a quote takes under an hour instead of half a day.

Read the case study Giant Pao Precision CNC precision machiningFounded 2017

Giant Pao Precision Co., Ltd.

Micron tolerances on semiconductor equipment parts, and an inspection sheet still typed line by line. CADASU now generates the balloons and the characteristics, and a sheet takes 22 minutes instead of two hours.

Read the case study Ming Star Precision CNC precision machiningTaoyuan

Ming Star Precision Co., Ltd.

Revisions arrived constantly and the only way to check was two drawings side by side. Now every difference is listed and marked on the drawing, and a revision check takes 9 minutes instead of an hour.

Read the case study Ron Jye Enterprise Milling and fixture manufactureYangmei, Taoyuan

Ron Jye Enterprise Co., Ltd.

Thirty years of drawings scattered everywhere, and knowledge walking out with each retirement. Now drawings and SOPs are searched together, and every answer names the document and the page.

Read the case study Yan Hui Gear manufacturingXizhi, New Taipei

Yan Hui Co., Ltd.

Gear specs have a lot of fields and no two customers format them alike, so every re-keyed order was a chance to get it wrong. Orders and quotes now flow into the system automatically; a person only confirms before sending.

Read the case study Hi-More Industrial robotsZhongli, Taoyuan

Hi-More Co., Ltd.

A customer drawing needed a new title block, translation, unit conversion and a stamp before it could go to the floor. That whole run is now one pass, 7 minutes instead of 40.

Read the case study Chung Hsing Tooling Tablet press toolingTablet punches and dies, upper, lower and die

Chung Hsing Pharmaceutical Tooling

No two pharmaceutical specification sheets look alike, and every radius, engraving and chamfer had to be copied into a tooling drawing. Specifications now convert straight into shop drawings, a full tool set in 14 minutes instead of an hour.

Read the case study Jou Ji Precision machiningLow volume, high mix

Jou Ji Co., Ltd.

Enquiries arrive a dozen drawings at a time, and someone had to remember whether each one had been made before. The whole batch now goes in at once against past quotes, a round of enquiries takes 18 minutes instead of over an hour.

Read the case study

The next case study could be yours

Get in touch and see what CADASU can do for you.

Contact